DS360A Rotary Measure Directional Sensor
The DS360A is fabricated by 3 axis fluxgate magnetometer and 3 axis accelerometer，the output signal of the DS360A is digitized by a 24-bit high resolution ADC,the temperature drift and orthogonal compensation were carried out.It is designed to enable high accuracy measurement of the roll, inclination and azimuth orientation angles of a system to which it is mounted while operating between 0~ 150 ℃ .
Product Introduction:
The built-in digital filter and compensation algorithm can remove the vibration and rotation interference
signals,can accurately measure the different angles under vibration and ratation.
The DS360A can be customized the probe size,installation and digital output interface (UART,RS232).
Features:
●High temperature resistance
●Vibration and shock resistance
●Rotary measure
●Low power consumption
Application:
Electrical Interfaces And Definition:
OUTLOOK:
Technical Specification：
Parameter | Test condition | Standard | Unit |
Azimuth Accuracy(static) | Inclination≥10° | ±1 |
° |
Azimuth Accuracy(rotary) | Inclination≥45° , 300RPM | ±1.5 | |
Deviation Angles（ static） | 0~ 180° | ±0. 1 | |
Inclination（rotary） | 300RPM | ±0.2 | |
Sine vibration： 10~300Hz ，6G | ±0.2 | ||
Tool surface（ static） | Inclination≥10° | ±1 | |
Operating tempeature | - | 0~ 150 |
℃ |
storage | - | -40~ 160 | |
Input voltage range | - | 10~36 | V |
Input power current | TA=25℃,Vs= 15V | ≤80 | mA |
Communication interface | - | TTL/RS-232 | - |
Baud rate | - | 9600~ 115200 | Hz |
Outlook size | - | 384×31 | mm |