DS560 Miniature Orientation Sensor
The DS560 directional module is designed to enable high accuracy measurement of the roll, axis alignment and azimuth orientation angles in borehole logging and drilling applications.
Using 4.9-12V DC voltage power supply and adopting UART asynchronous transmitter for digital transmission. It consists of 3-axis fluxgate magnetometers and 3-axis accelerometers.
Product Introduction:
The DS560 communicates with the outside world over a UART interface. It is compatible with TTL through logic level, and the baud rate is normally set at 9600~115200 to operate.
The user can change baud rate by setting data bits in E2 PROM. Logic level 5V(customization), data update rate once per second.
TWO communication protocols can be selected according to specific requirements:
(1) Binary system: under this system, user needs to send one bit for data request and DS560 responds with multi-bit data package.
(2) ASCII : ASCII protocol acquires data by sending ASCII character to DS560. data returned from DS560 is transmitted as ASCII data flow ，therefore can be easily indicated on the video terminal.
Features:
● Temperature：0～135℃
● Accuracy：
±0.2°for inclination
±0.2°for tool face
±0.5° for azimuth
● Shock resistance 2000g ，vibration resistance 30g
● Digital data transmission
● With minimum size of 20.4mm×19.1mm×116.8mm
Application:
Borehole logging
Magnetic compass
Orientation determination for buoys, sonar systems, etc.
Technical Specification：
Accuracy | |
Inclination | ±0.2° |
Tool face | ±0.2° |
Azimuth | ±0.5° |
Power interface | |
Input Voltage Range | +4.9～ +12V |
Input current | 45mA@5V |
Interface | TTL / RS232 |
Baud rate | 9600(default)up to 115200 |
Communication protocol | ASCⅡ or Binary |
Leads | 20”x 4 |
Environmental performance | |
Operating Temperature Range | 0~135℃ |
Storage Temperature Range | -40℃ ~135℃ |
Shock | 2000g , 1ms |
Vibration Peak Sine | 30g |
Physical parameters | |
Width | 20.4mm |
Height | 19.1mm |
Length | 116.8mm |